Holden Combo - Combo - Specifications -
Combo
Search Site
Search Site
|
Engine Specifications
|
Variable intake control and high exhaustgas recirculation levels.Four cylinders. Alloy cylinder head. Double overhead camshafts operate four valves per cylinder. Sequential multipoint fuel injection.Distributorless direct ignition system. Coil-at-plug ignition. Cylinder selective knock control. Electronic throttle control. Electric cooling fan. 100 amp alternator | |
|
Capacity (cc)
|
1364 | |
|
Power
|
66 @ 5600rpm (ECE, kW)
Maximum figures as per ECE regulations |
|
|
Torque
|
125 @ 4000rpm (ECE, Nm)
Maximum figures as per ECE regulations |
|
|
Transmission
|
5-speed manual transmission | |
|
Fuel economy (L/100km)
|
6.3
Fuel economy based on ADR 81/02 testing for combined urban/extra urban driving. These figures are provided to assist you in comparing the fuel consumption of this vehicle with other vehicles. Fuel consumption depends on factors such as traffic conditions, vehicle condition, vehicle load and your driving style. |
|
|
Greenhouse Rating
|
Greenhouse Rating 7.5
Figures sourced from greenvehicleguide.gov.au |
|
|
Green Vehicle Guide Star Rating
|
3.5 GVG STAR rating
Figures sourced from greenvehicleguide.gov.au |
|
|
Recommended fuel
|
E10, 91 octane (ULP) or 95 octane (PULP - may result in improved engine performance and economy) | |
|
Fuel tank capacity (L)
|
52.0 | |
|
Brakes
|
Front ventilated disc/rear disc. Load sensing brake pressure proportioning valve. | |
|
Towing capacity (kg)
|
1000 with trailer brakes / 550 without trailer brakes | |
|
Service
|
The complimentary inspection is due at 3,000km or 3 months (whichever occurs first). The first service is due at 15,000km or 12 months (whichever occurs first) and then every 15,000km or 12 months (whichever occurs first) since the last service. Additional services may be required under certain driving conditions such as when towing (refer to owner's handbook). |